Skip to main content
Local renovation company based in Brampton, Ontario
Commercial epoxy flooring · Brampton & the GTA

Commercial Epoxy Flooring in Brampton, Mississauga & the GTA

Seamless, easy-to-clean epoxy floors for warehouses, showrooms, retail stores, workshops and commercial garages, installed by NextWave Renos from our base in Brampton.

Enter your floor area and see a per-square-foot estimate from our published commercial rates, or invite us to assess the site and bid on your project.

Call 647-831-3865

Estimates are before HST and confirmed after a free site assessment. Complex projects are always assessed on site rather than priced automatically.

Who we install for

Commercial spaces we coat

Tell us how the floor is used and we will recommend a system that suits the traffic, the look you want and how long the space can be closed.

Warehouses & storage

Large open slabs where a sealed, light-reflecting floor is easier to sweep and keep clean. Larger areas get lower per-square-foot rates.

Showrooms

Floors that are part of the display. Full flake, solid colour or a one-of-a-kind metallic finish.

Retail stores

Seamless floors for steady foot traffic, with work planned around opening hours.

Workshops & garage bays

Coated concrete that is easier to clean than bare slab. Heavy equipment or chemical exposure is assessed on site first.

Commercial garages

Garage bays and vehicle areas for businesses, priced on the commercial rate table below.

Offices & common areas

Back-of-house, corridors and common areas that need a clean, durable finish.

Food-prep and wash-down areas, chemical or heavy-equipment exposure, and floors that need a specific slip-resistance rating always get a site assessment before we recommend a system or give a price.
How estimates are calculated

Commercial epoxy pricing, per square foot

Commercial floors are priced by area and floor system. The larger the floor, the lower the rate. These are the same rates the estimator below uses, before HST.

Floor areaSolid-colourFull flakeMetallic

Included in the rate

Concrete prep, diamond grinding, minor crack and surface repair, the floor system you choose, and jobsite cleanup.

How size changes price

Your total area sets the rate tier. Several rooms or bays can be added together in the estimator, so a multi-area project is priced on its combined size.

How condition changes price

Sound concrete is priced as shown. Pitted surfaces, large cracks or spalling, and old paint or coatings that need removing are priced after we see them.

Priced after the site visit

Wall and step coatings, anti-slip texture, extra clear coats, custom colour matching and any work outside normal hours or in phases.

Commercial vs residential

How commercial floors differ from a home garage

Traffic and use

A home garage sees a car or two. A commercial floor may see carts, pallet jacks, forklifts, customers or staff all day, so we ask what touches the floor before recommending a system.

Scale

Commercial projects often cover thousands of square feet across several areas, with columns, drains and control joints to work around.

Downtime

Your business may need to stay open. We plan around operating hours, phase the work by area where possible, and give you cure times in writing.

Site assessment first

We check slab condition, existing coatings and moisture on site before confirming the system and price, so the quote reflects your actual floor.

Finish options

Three floor systems for commercial spaces

Solid-Colour Epoxy

One clean colour. A practical, cost-effective choice for warehouses, storage and work areas.

    Solid colours show dust and scuffs more than flake.

    Full Flake

    Decorative chips across the whole floor under a clear topcoat. The texture helps hide dust and small marks in busy spaces.

      Colour blends are chosen from physical samples.

      Metallic Epoxy

      A seamless, flowing finish worked by hand, popular for showrooms and retail where the floor is part of the look.

        Flat floors only, on sound, flat concrete. No walls or steps.

        Concrete preparation

        Industrial concrete floor preparation

        A coating only lasts if it bonds to the concrete, and poor surface preparation is a common reason floors peel. Preparation is built into every commercial rate.

        Inspection

        We check the slab for cracks, joints, old coatings, oil or chemical contamination and moisture before confirming the system.

        Diamond grinding

        Grinding removes the weak surface layer and opens the concrete so the coating can grip it.

        Crack and joint repair

        Minor cracks and chips are filled before coating. Larger damage is assessed on site and priced separately.

        Moisture

        Moisture coming up through a slab can push a coating off. Where there are signs of moisture we test before recommending a system.

        Existing coatings

        Old paint, sealer or epoxy is tested on site, and removal is priced once we know what is on the floor.

        Curing

        Cure times depend on the products, temperature and humidity. Walk-on, cart and vehicle times for your floor are in your written quote.

        More detail on moisture limits and surface profile in our guide to commercial epoxy flooring costs, preparation and downtime and why epoxy floors peel.

        Planning and scheduling

        From quote request to finished floor

        1. Request a quote

          Use the estimator below or invite us to bid. Send drawings or specs by reply email if you have them.

        2. Site assessment

          We inspect the slab, measure, and discuss traffic, access and when the space must reopen.

        3. Written quote

          System, scope, price and cure times in writing, including any phasing or after-hours work.

        4. Preparation

          Grinding, repairs and any coating removal you approved.

        5. Installation

          Coats applied in sequence, area by area where the project is phased.

        6. Handover

          Final walkthrough, cure times and care instructions for your team.

        Before you request a quote

        • Measure the area and note columns, drains and joints.
        • List what touches the floor: vehicles, carts, chemicals, water.
        • Decide whether you need slip resistance or line striping.
        • Agree on access, working hours and when the space must reopen.
        • Ask how moisture will be tested and what happens if it is high.
        Durability and maintenance

        Keeping a commercial epoxy floor looking good

        A sealed epoxy floor does not soak up spills or dust the way bare concrete does, which makes it easier to sweep and clean. How well it holds up depends on the system, the preparation underneath and what the floor is exposed to, which is why we ask about traffic, equipment and chemicals before we recommend a system.

        Day to day, regular dust-mopping or sweeping keeps grit from scratching the surface, and spills are easier to clean before they dry. We include care instructions for your specific floor at handover. If a floor will see forklifts, steel wheels, harsh chemicals or wash-downs, we assess it on site so the system matches the use.

        From our commercial customers

        What commercial customers have said

        Commercial showroom

        Praised the “concrete preparation, edges and overall consistency of the floor.” Excerpt from a published Google review.

        Commercial space

        Noted the team “worked around our scheduling requirements.” Excerpt from a published Google review.

        Read all customer reviews

        Commercial estimator

        Get a commercial epoxy estimate

        Choose your building type, enter the floor area, pick a finish and concrete condition, and see an estimate from our commercial rates. Complex projects are flagged for a free site assessment instead of an automated price.

        See commercial rates
        Service areas

        Commercial epoxy flooring across Brampton and the GTA

        NextWave Renos is based in Brampton and installs commercial epoxy floors across Peel, Halton, York and Toronto. Site assessments are free throughout these areas.

        Brampton

        Our home base. Warehouses, workshops, showrooms and retail units across Brampton’s industrial and commercial areas are a short drive away, which makes site visits and phased or after-hours work easier to schedule.

        Mississauga

        We install warehouse, showroom and retail floors in Mississauga, including multi-area projects where several bays or units are priced together on their combined size.

        Vaughan

        We take on epoxy flooring projects in Vaughan, including showrooms and warehouse space. (Our general renovation services do not cover Vaughan; epoxy flooring does.)

        Toronto and Etobicoke

        Commercial and retail floors in Toronto and Etobicoke, with work planned around operating hours where the space needs to stay open.

        Milton, Oakville, Caledon, Georgetown and Halton Hills

        We serve workshops, commercial garages and showrooms in Halton and Caledon, where we have also completed residential epoxy floors, including a metallic garage floor in Georgetown and a flake garage floor in Caledon.

        See our service areas for full coverage, or our main epoxy flooring page for garage and basement floors.

        Commercial epoxy flooring questions

        Can you give a price without visiting?

        For straightforward floors, the estimator gives a per-square-foot estimate from our commercial rates. Every price is confirmed after a free site assessment, and complex projects (food service, chemical or heavy-equipment exposure, rated slip resistance, or floors over 50,000 sq ft) are priced only after we see the site.

        Can you work after hours or in phases?

        Yes, tell us in the estimator or quote request. After-hours and phased work is planned and priced at the site assessment.

        Can you bid on a project with drawings or a spec?

        Yes. Choose “Invite NextWave to Bid”, include the bid date, and reply to our follow-up email with your drawings or specifications.

        Do you coat walls or steps in commercial spaces?

        Commercial wall and step coatings are quoted after the site visit rather than in the online estimate.

        Planning a commercial floor?

        Get an estimate in minutes or invite NextWave to assess your site and bid.

        Get a Free Quote